Custom DTF Transfers

• Time: 10 seconds / 5 seconds
• Temperature: 300°F (Fahrenheit)
• Pressure: 7 / Firm pressure

1. The design will be printed as a mirror image with white ink on the surface.

2. Place the garment on the heat press and position the direct-to-film transfer onto the garment with the image (right reading) facing up.

3. Press with firm pressure at 300°F for 10 seconds.

4. Choose Peel:

• For a HOT or warm peel, start from the corner with the most ink coverage and remove it in one smooth motion.
• For a COLD peel, remove the garment from the heat press, allow it to cool completely, and then peel the film off.

5. Finish: Place the garment back on the heat press, cover the design with a standard or Teflon finishing sheet, and press for 5 seconds.